User's Manual

ACCumulate
Command :MACHine{1|2}:SWAVeform:ACCumulate
{{ON|1}|{OFF|0}}
The ACCumulate command allows you to control whether the waveform
display gets erased between individual runs or whether subsequent
waveforms are allowed to be displayed over the previous waveforms.
Example OUTPUT XXX;":MACHINE1:SWAVEFORM:ACCUMULATE ON"
Query :MACHine{1|2}:SWAVeform:ACCumulate?
The ACCumulate query returns the current setting. The query always shows
the setting as the characters, "0" (off) or "1" (on).
Returned Format
[:MACHine{1|2}:SWAVeform:ACCumulate] {0|1}<NL>
Example OUTPUT XXX;":MACHINE1:SWAVEFORM:ACCUMULATE?"
ACQuisition
Command :MACHine{1|2}:SWAVeform:ACQuisition
{AUTOmatic|MANual}
The ACQuisition command allows you to specify the acquisition mode for the
state analyzer. The acquisition modes are automatic and manual.
Example OUTPUT XXX;":MACHINE2:SWAVEFORM:ACQUISITION AUTOMATIC"
SWAVeform Subsystem
ACCumulate
18–5