Troubleshooting guide

Lab Exercise: Quantification

Testing the Calibration Table

1) Load the medium standard's data file, med.d. Go to the Report menu, then

Specify Report... or select the Specify Report Calculation and Print Style

tool.

2) Make the following selections:

Destination = Printer and Screen

Calculate = ESTD

Based on = Area

Report Style = Detail

Select chromatogram output.

3) OK the report specifications and save this to your method.

4) From the Report menu, select Print Report or select the Identify Peaks,

calculate Results & print Report tool.

5) Study the resulting report and modify retention time windows or qualifiers if

necessary. Remember to resave the method if you are satisfied with

report style.