Troubleshooting guide

Lab Exercise: Advanced Reporting
Automated Peak Purity
129
Automated Peak Purity
The Short + Spectrum, Detail + Spectrum, and Full report styles will produce
automated peak purity analyses of calibrated chromatographic peaks.
1) Make certain Quant.M is still loaded. Make certain the last data file you
collected is still loaded, Syss.d.
2) To print an automated peak purity report, open the Report menu and select
Specify Report or use the Specify Report tool.
3) Change the Report style to Short + Spectrum. OK the dialog box.
4) Resave the method under the File menu or use the Save Method tool.
5) Load a data file from your last sequence run.
6) Under the Report menu, select Print Report. Examine the resulting report.
Note: Purity Options may be saved as part of the method in order to produce the
desired peak purity report.