Technical data

3-70 Agilent B1500A/B1505A Programming Guide, Edition 11
Programming Examples
High-Speed Spot C Measurements
Measurement
Result Example
Cp (pF), C_st, G (uS), G_st, OSC (mV), Osc_st, DC (V), Dc_st, Time
(s)
4.96641,NJC,26.1348,NJY,28.7814,NJV,4.7239,NJV,0.0146
Data save completed.
Do you want to perform measurement again?
Table 3-19 Phase Compensation and Data Correction Commands for MFCMU
Function Command Parameters
Sets the phase compensation
mode, auto or manual
ADJ slot,mode
Performs phase
compensation data
measurement
ADJ? slot
Clears the frequency list for
data correction
CLCORR slot,mode
Adds the specified frequency
to the frequency list
CORRL slot,freq
Returns the frequency
defined in the frequency list
CORRL? slot[,index]
Sets the reference value of
open/short/load standard
DCORR slot,corr,mode,primary,secondary
Returns the reference value
of the specified standard
DCORR? slot,corr
Performs the specified
correction (open, short, or
load) data measurement
CORR? slot,corr
Sets the specified correction
ON or OFF
CORRST slot,corr,state
Returns the status ON or
OFF of the specified
correction
CORRST? slot,corr