Technical data

4-12 Agilent B1500A/B1505A Programming Guide, Edition 11
Command Reference
N1258A/
N1259A
Module
Selector
Control
ERHPA/
ERHPA?
Specifies/returns the module connected to the module selector
input.
ERHPL/
ERHPL?
Sets/returns the LED status indicator operation status.
ERHPS/
ERHPS?
Sets/returns the connection status of the series resistor on the
HVSMU path.
ERHPP/
ERHPP?
Sets/returns the connection status of the input-to-output path.
ERHPE/
ERHPE?
Sets/returns the External Relay Control status.
ERHPR/
ERHPR?
Sets/returns the signal level applied to the External Relay Control
connector pin.
N1265A
Ultra High
Current
Expander/
Fixture
Control
ERPFUHCA/
ERPFUHCA?
Specifies/returns the MC/HCSMU modules connected to the V
Control and I Control inputs of the N1265A.
ERPFUHCTST? Executes the self-test of the N1265A and returns the result.
ERPFUHCCAL? Executes the self-calibration of the N1265A and returns the result.
ERPFUHCMAX
?
Returns the available maximum current for the currently-connected
N1265A.
ERPFGA/
ERPFGA?
Specifies/returns the MC/HCSMU module connected to the Gate
input.
ERPFDA/
ERPFDA?
Specifies/returns the measurement resources connected to the
Selector Input.
ERPFDP/
ERPFDP?
Sets/returns the connection status of the selector input-to-output
path.
ERPFDS/
ERPFDS?
Sets/returns the connection status of the series resistor on the
HVSMU path.
ERPFGP/
ERPFGP?
Sets/returns the connection status of the MC/HCSMU output
connected to the Gate input.
ERPFGR/
ERPFGR?
Sets/returns the connection status of the series resistor on the Gate
path.
ERPFTEMP? Returns the temperature measured by using the thermocouples
(N1265A-041) connected to the K Thermocouple 1 and 2 terminals.
Category Command Summary