Technical data

Agilent B1500A/B1505A Programming Guide, Edition 11 5-31
Error Messages
Self-test/Calibration Error
740 GNDU failed calibration.
935 CMU FPGA version mismatch.
2400 SPGU module is in TEST FAIL state.
2401 Digital H/W function test failed.
2402 CPLD access function test failed.
2403 CPLD version check test failed.
2404 CPLD revision check test failed.
2405 FPGA configuration test failed.
2406 FPGA access function test failed.
2407 FPGA version check test failed.
2408 FPGA revision check test failed.
2409 DCM function test failed.
2410 CONVEND interrupt function test failed.
2411 EMG interrupt function test failed.
2412 10 MHz clock test failed.
2413 FPGA SYNC SEL pin control function test failed.
2414 FPGA SYNC FB pin control function test failed.
2415 FPGA SYNC IN pin control function test failed.
2416 IDELAY function test failed.
2417 NVRAM access function test failed.
2418 ADC function test failed.
2419 SDRAM access function test failed.
2430 Module EEPROM CRC data is invalid.
2431 Module EEPROM CRC data of module data ID is invalid.
2432 Module EEPROM CRC data of format revision data is invalid.
2433 Module EEPROM CRC data of analog reference data is invalid.
2434 Module EEPROM CRC data of timing calibration data is invalid.
2435 Module EEPROM CRC data is skew calibration data invalid.