Technical data

5-32 Agilent B1500A/B1505A Programming Guide, Edition 11
Error Messages
Self-test/Calibration Error
2450 Internal ADC function test failed.
2451 0.5 Vref Internal ADC function test failed.
2452 4.5 Vref Internal ADC function test failed.
2453 Power Amp initial test failed.
2454 Filter & Amp test failed.
2455 Internal temperature test failed.
2456 Internal output resistance test failed.
2481 Invalid frame configuration.
2482 Frame has no modules.
2483 PLL not locked in slave module.
2484 Reference line is not connected.
2485 Sync line is not connected.
2486 Interrupt line is not available.
2487 Module service request assertion test failed.
2488 Module service request detection test failed.
2489 Emergency interrupt is not available.
2500 SPGU calibration failed.
2501 Power Amp idling calibration failed.
2502 DAC output level calibration failed.
3002 WGFMU initialization failure.
3003 WGFMU FPGA is not configured.
3004 EEPROM CRC data of system timing data is invalid.
3005 EEPROM CRC data of DAC DCM PS data is invalid.
3006 EEPROM CRC data of ADC DCM PS data is invalid.
3007 EEPROM CRC data of DAC clock edge data is invalid.
3008 EEPROM CRC data of ADC clock edge data is invalid.
3009 EEPROM CRC data of DAC level calibration data is invalid.
3010 EEPROM CRC data of ADC level calibration data is invalid.