Technical data

Agilent B2900 SCPI Command Reference, Edition 2 4- 13
Subsystem Commands
:CALCulate:LIMit:<LOWer|UPPer>:DIGital[:DATA]
limit returns the present setting of the lower/upper limit used for the limit test
specified by m. If a parameter is specified, limit returns the value assigned to DEF,
MIN, or MAX. Response data type is NR3.
Example :CALC:LIM:LOW -2.5
:CALC2:LIM12:UPP?
:CALCulate:LIMit:<LOWer|UPPer>:DIGital[:DATA]
Defines the bit pattern used to indicate failed-by-exceeding-lower-limit or
failed-by-exceeding-upper-limit of the limit test specified by m. It must be entered in
the format set by the
:FORMat:DIGital command. The bit pattern defined by this
command is used for the GRAD composite limit test.
Syntax :CALCulate[c]:LIMit[m]:<LOWer|UPPer>:DIGital[:DATA] bit_pattern
:CALCulate[c]:LIMit[m]:<LOWer|UPPer>:DIGital[:DATA]?
For <LOWer|UPPer>, specify LOWer for failed-by-exceeding-lower-limit, or UPPer
for failed-by-exceeding-upper-limit.
Parameter bit_pattern 0 (default setting in decimal expression) to 16383. Parameter
data type is NR1 or NDN.
Query response bit_pattern <newline>
bit_pattern returns the fail bit pattern in the format specified by the
:FORMat:DIGital command. Response data type is NR1 or NDN.
Example :CALC:LIM:LOW:DIG:DATA 64
:CALC2:LIM12:UPP:DIG?
:CALCulate:LIMit:PASS:DIGital[:DATA]
Defines the bit pattern used to indicate a pass of the limit test specified by m. It must
be entered in the format set by the
:FORMat:DIGital command. The bit pattern
defined by this command is used for the SORT composite limit test.
Syntax :CALCulate[c]:LIMit[m]:PASS:DIGital[:DATA] bit_pattern
:CALCulate[c]:LIMit[m]:PASS:DIGital[:DATA]?