Technical data

Agilent B2900 SCPI Command Reference, Edition 2 4- 23
Subsystem Commands
:DISPlay:CSET
DISPlay Subsystem
For the numeric suffix [d], see “Numeric Suffix” on page 1-8.
:DISPlay:CSET
Selects the color set of the front panel display. This command setting is not changed
by power off or the *RST command.
Syntax :DISPlay:CSET color
:DISPlay:CSET?
Parameter color Color set of the front panel display. 1|2. Parameter data type is
NR1.
color=1 selects the default color set.
color=2 selects the alternative color set.
Query response response <newline>
response is 1 or 2, and indicates the color set of the front panel display. Response
data type is NR1.
Example :DISP:CSET 1
:DISP:CSET?
:DISPlay:DIGits
Sets the display resolution of the data displayed on the front panel display.
Syntax :DISPlay:DIGits digits
:DISPlay:DIGits? [MINimum|MAXimum|DEFault]
Parameter digits Resolution. value (4 to 7)|MINimum|MAXimum|DEFault
(default is 7). Parameter data type is NRf+. Query does not
support digits=value.
digits=4 selects 3½ digit resolution.
digits=5 selects 4½ digit resolution.