Technical data

Agilent B2900 SCPI Command Reference, Edition 2 4- 85
Subsystem Commands
:SENSe:FUNCtion[:ON]:ALL
Parameter function “CURRent[:DC]”|“VOLTage[:DC]”|“RESistance” Default is
“VOLT”,“CURR”. Case insensitive. Parameter data type is
SPD.
function=“CURRent[:DC]” selects the current measurement function.
function=“VOLTage[:DC]” selects the voltage measurement function.
function=“RESistance” selects the resistance measurement function. See
“:SENSe:RESistance:MODE” on page 4-86 for resistance measurements.
Query response function[, function[, function]]<newline>
function returns “CURR”, “VOLT”, or “RES”, and indicates that the currently
enabled measurement function. If a function is not selected, query returns “” (null
string). Response data type is SRD.
Example :SENS:FUNC “RES”,“VOLT”
:SENS2:FUNC:ON?
:SENSe:FUNCtion[:ON]:ALL
Enables all measurement functions.
See “:SENSe:RESistance:MODE” on page 4-86 for resistance measurements.
Syntax :SENSe[c]:FUNCtion[:ON]:ALL
Example :SENS:FUNC:ALL
:SENSe:FUNCtion[:ON]:COUNt?
Returns the number of measurement functions that are enabled.
Syntax :SENSe[c]:FUNCtion[:ON]:COUNt?
Example :SENS:FUNC:COUN?
:SENSe:FUNCtion:STATe?
Returns if the specified measurement function is enabled or disabled.
Syntax :SENSe[c]:FUNCtion:STATe? function