Technical data

4- 90 Agilent B2900 SCPI Command Reference, Edition 2
Subsystem Commands
:SENSe:WAIT:GAIN
:SENSe:WAIT:GAIN
Sets the gain value used for calculating the measurement wait time for the specified
channel. See
:SENSe:WAIT[:STATe].
Syntax :SENSe[c]:WAIT:GAIN gain
:SENSe[c]:WAIT:GAIN? [gain]
Parameter gain value (0 to 100)|MINimum|MAXimum|DEFault (default is 1).
Parameter data type is NRf. Query does not support gain=value.
Query response gain <newline>
gain returns the present setting of the gain value. If a parameter is specified, gain
returns the value assigned to DEF, MIN, or MAX. Response data type is NR3.
Example :SENS:WAIT:GAIN 0.5
:SENS2:WAIT:GAIN?
:SENSe:WAIT:OFFSet
Sets the offset value used for calculating the measurement wait time for the
specified channel. See
:SENSe:WAIT[:STATe].
Syntax :SENSe[c]:WAIT:OFFSet offset
:SENSe[c]:WAIT:OFFSet? [offset]
Parameter offset value (0 to 1 seconds)|MINimum|MAXimum|DEFault (default
is 0). Parameter data type is NRf. Query does not support
offset=value.
Query response offset <newline>
offset returns the present setting of the offset value. If a parameter is specified, offset
returns the value assigned to DEF, MIN, or MAX. Response data type is NR3.
Example :SENS:WAIT:OFFS 0.5
:SENS2:WAIT:OFFS?