Technical data

4- 150 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:ABORt<:ACQuire|:TRANsient|[:ALL]>

TRIGger Subsystem

For the numeric suffix [c], see “Numeric Suffix” on page 1-8.

:ABORt<:ACQuire|:TRANsient|[:ALL]>

Aborts the specified device action for the specified channel. Trigger status is

changed to idle.

Syntax :ABORt<:ACQuire|:TRANsient|[:ALL]> [chanlist]

For <:ACQuire|:TRANsient|[:ALL]>, specify :ACQuire for measurement,

:TRANsient for source output, or :ALL for both device actions.

Parameter chanlist Channels. Parameter data type is channel list.

(@1)|(@2)|(@1,2)|(@1:2)|(@2,1)|(@2:1). See

“Channel List

Parameter” on page 1-8.

(@1) selects channel 1 only. (@2) selects channel 2 only. (@1,2), (@1:2), (@2,1),

and (@2:1) selects both channels 1 and 2.

If this parameter is not specified, chanlist=(@1) is set.

Example :ABOR:ACQ (@2)

:ARM<:ACQuire|:TRANsient|[:ALL]>[:IMMediate]

Sends an immediate arm trigger for the specified device action to the specified

channel. When the status of the specified device action is initiated, the arm trigger

causes a layer change from arm to trigger.

Syntax :ARM<:ACQuire|:TRANsient|[:ALL]>[:IMMediate] [chanlist]