Technical data

Agilent B2900 SCPI Command Reference, Edition 2 2- 35
Subsystem Command Summary
Controlling Source/Measure Trigger
:TRIG[c]:ACQ:COUN count
:TRIG[c]:TRAN:COUN count
:TRIG[c][:ALL]:COUN count
:TRIG[c]:ACQ:COUN? [count]
:TRIG[c]:TRAN:COUN? [count]
:TRIG[c][:ALL]:COUN? count
Sets the trigger count for the specified
device action.
count=MINimum|MAXimum|DEFault|
1
to 100000
Query does not support count=1 to
100000.
Arm count  Trigger count must be less
than 100001.
1
:TRIG[c]:ACQ:DEL delay
:TRIG[c]:TRAN:DEL delay
:TRIG[c][:ALL]:DEL delay
:TRIG[c]:ACQ:DEL? [delay]
:TRIG[c]:TRAN:DEL? [delay]
:TRIG[c][:ALL]:DEL? delay
Sets the trigger delay for the specified
device action.
delay=MINimum|MAXimum|DEFault|
0
to 100 seconds
Query does not support delay=0 to 100.
0
:TRIG:ACQ[:IMM] [chanlist]
:TRIG:TRAN[:IMM] [chanlist]
:TRIG[:ALL][:IMM] [chanlist]
Sends an immediate trigger for the
specified device action to the specified
channel. When the status of the specified
device action is initiated, the trigger
causes the specified device action.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
(@1) for 1-ch
models
(@1,2) for
2-ch models
:TRIG[c]:ACQ[:LAY]:SOUR:LAN lan_id
{,lan_id}
:TRIG[c]:TRAN[:LAY]:SOUR:LAN lan_i
d{,lan_id}
:TRIG[c][:ALL][:LAY]:SOUR:LAN lan_
id{,lan_id}
:TRIG[c]:ACQ[:LAY]:SOUR:LAN?
:TRIG[c]:TRAN[:LAY]:SOUR:LAN?
Specifies one or more LXI triggers used
for the trigger source for the specified
device action.
lan_id=LAN0|LAN1|LAN2|LAN3|
LAN4|LAN5|LAN6|LAN7
All is selected.
Command Summary Reset setting