Technical data

2- 40 Agilent B2900 SCPI Command Reference, Edition 2
Subsystem Command Summary
Reading Source/Measure Data
Table 2-11 FETCh Subsystem
Command Summary Reset setting
:FETC:ARR? [chanlist]
Returns the array data which contains all
of the voltage measurement data, current
measurement data, resistance
measurement data, time data, status data,
or source output setting data specified by
the :FORM:ELEM:SENS command.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:FETC:ARR:CURR? [chanlist]
:FETC:ARR:RES? [chanlist]
:FETC:ARR:SOUR? [chanlist]
:FETC:ARR:STAT? [chanlist]
:FETC:ARR:TIME? [chanlist]
:FETC:ARR:VOLT? [chanlist]
Returns the array data which contains all
of the current measurement data,
resistance measurement data, source
output setting data, status data, time data,
or voltage measurement data specified by
CURR, RES, SOUR, STAT, TIME, or
VOLT.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:FETC[:SCAL]? [chanlist]
Returns the latest voltage measurement
data, current measurement data,
resistance measurement data, time data,
status data, or source output setting data
specified by the :FORM:ELEM:SENS
command.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:FETC[:SCAL]:CURR? [chanlist]
:FETC[:SCAL]:RES? [chanlist]
:FETC[:SCAL]:SOUR? [chanlist]
:FETC[:SCAL]:STAT? [chanlist]
:FETC[:SCAL]:TIME? [chanlist]
:FETC[:SCAL]:VOLT? [chanlist]
Returns the latest current measurement
data, resistance measurement data, source
output setting data, status data, time data,
or voltage measurement data specified by
CURR, RES, SOUR, STAT, TIME, or
VOLT.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)