Technical data

6 Calibration Procedures

Using the Front Panel for Adjustments

192 U3606A User’s and Service Guide

If the reading is out of the acceptable range, “FAiL” and the error code

is displayed momentarily. The instrument will then return to the failed

adjustment item. If this is the case, you are required to inspect whether

the correct reference input has been applied. Refer to Table 9- 7 on

page 265 for the meaning of the error codes.

5 Repeat step 3 and step 4 until all adjustments for that particular

function have been completed.

6 Select another function to be calibrated. Repeat step 3 to step 5.

For a key that hosts more than one function, for example , press

again to switch to the next function.

7 After calibrating all the functions, press Shift > Exit or Shift + to

exit adjustment mode.

8 Power- off the instrument and then power- on it again. The instrument is

now calibrated and ready for normal operation.

NOTE

See “Adjustments procedures” on page 193 and its respective submodule

headings for a list of adjustment items and input adjustment values for

each measurement and source function in the U3606A.