Specifications

16
DisplayPort compliance software
To purchase the DisplayPort software
with a new or existing Infiniium Series
oscilloscopes, order the following
options.
Test point access adapters
For physical connection to a
DisplayPort device to perform tests
with the DisplayPort Compliance Test
Software, order one or more of the
following:
Ordering information
Model number Description Quantity
W2641B DisplayPort Test Point Access Adapter (Plug) 1
BIT-mDP-PTF-0001 Mini-DP Plug Test Point Access Adapter 1
BIT-eDP-PTF-0001 eDP Plug Test Point Access Adapter 1
BIT-DP-PTF-0003
Standard DisplayPort Plug Test Point Access Adapter 1
BIT-DP-RTF-0003 Standard DisplayPort Receptacle Test Point Adapter.
Used in Cable Test or Sink system calibration
As needed
BIT-DP-CONN-0001 Connection Kit for Bitifeye Fixtures. Includes 2
matched sets of SMA-SMA 1 meter cables and
low frequency adaptor board.
1
Fixtures with Prefix ‘BIT’ are procured through BitifEye Corporation (Note: TPAs available through
Wilder Technologies and ICT Luxshare are also recommended)
1. Requires software 5.00 and above.
2. Software 4.30 or above requires Windows 7.
N2753A Infiniium Windows XP to 7 OS upgrade
kit (oscilloscope already has M890 motherboard).
N2754A Infiniium Windows XP to 7 OS and M890
motherboard upgrade kit (oscilloscope without M890
motherboard). Verify the M890 motherboard using
the procedure found in the Windows 7 upgrade kit
data sheet, publication number 5990-8569EN.
3. For full switch configuration, please refer to www.
agilent.com/find/switching or the brochure
Automated Switching Solution for Oscilloscopes,
publication number 5991-2413EN.
Compliance software options
Application License type Infiniium
Z-Series
Infiniium 90000
Series
DisplayPort EPVC
software
Fixed Factory-installed U7232C-1FP Option 045
User-installed U7232C-1FP U7232C-1NL
Floating Transportable U7232C-1TP U7232C-1TP
1,2
Server-based N5435A-041
DisplayPort switch
matrix support
(optional)
3
Fixed Factory-installed U7232C-7FP Option 701
User-installed U7232C-7FP U7232C-7NL
Floating Transportable U7232C-7TP U7232C-7TP
1,2
Server-based N5435A-701
PrecisionProbe
(optional)
Fixed Factory-installed N2809A-1FP Option 001
User-installed N2809A-1FP N2809A-1NL
Floating Transportable N2809A-1TP N2809A-1TP
1,2
Server-based N5435A-003
Optional probes and software
Application License type Infiniium
Z-Series
Infiniium 90000
Series
EZJIT Plus jitter Fixed Factory-installed N5400A-1FP Option 004
User-installed N5400A-1FP N5400A-1NL
Floating Transportable N5400A-1TP N5400A-1TP
Server-based N5435A-001
Equalization Fixed Factory-installed N5461A-1FP Option 012
User-installed N5461A-1FP N5461A-1NL
Floating Transportable N5461A-1TP N5461A-1TP
Server-based N5435A-025
InfiniiSim Fixed Factory-installed N5465A-1FP Option 014
User-installed N5465A-1FP N5465A-1NL
Floating Transportable N5465A-1TP N5465A-1TP
Server-based N5435A-027
Probe amplifiers
(qty 1, 2, or 4)
N280xA N280xA or 1169A
Differential SMA
probe heads
(qty 1, 2, or 4)
N5444A N5444A or N5380B
(only with 1169A)