Technical data

Link Layer Protocol Tests 17
Agilent U7232A DisplayPort Electrical Performance Compliance Test Application 151
Pre-Emphasis Test Condition
Bit Rate: highest bit rates are supported.
Output Level: 400 mVolts.
Pre- Emphasis: All.
Test Pattern: PRBS 7.
Level Test Condition
Bit Rate: highest bit rates are supported.
Output Level: All.
Pre- Emphasis: 0 dB.
Test Pattern: PRBS 7.
Bit Rate Test Condition
Bit Rate: all bit rates are supported.
Output Level: 400 mVolts.
Pre- Emphasis: 0 dB.
Test Pattern: PRBS 7.
Test Plan Check Mode Turn on test plan check mode to simulate the actual test plan run flow
without actual tests being run.
SSC Acquisitions Number of SSC cycle captured for SSC related tests. Maximum
number is 25.
Low Bit Rate SSC
Smoothing Points
Sets the number of smoothing points for SSC low pass filter when bit
rate is 1.62 Gbps.
High Bit Rate SSC
Smoothing Points
Sets the number of smoothing points for SSC low pass filter when bit
rate is 2.70 Gbps.
Memory Depth Sets the memory depth for acquisition
PRBS Validation Algorithm Settings
PRBS pattern checker
rule
Determine the rules applied to PRBS 7 Pattern detector. By selecting
Strict, test can only proceed with the correct PRBS 7 pattern only.
Table 19 Test Configuration Options
Configuration Option Description