User`s guide

324
Logic Analyzer Reference
The Analyzer Trigger Menu
Edge terms 1 and 2 (Timing only)
The two edge terms are only available in the timing analyzer. Each edge
term is assigned positive-going, negative-going, or any-transition edge
type, or glitch.
Global timers 1 and 2
In addition to the resource terms available, there are two global timers
available. Each timer can be started, paused, continued, or stopped
from any sequence level except the first.
Assigning resource term names and values
The Terms field identifies the list of available resource terms within the
analyzer. A resource term can be assigned to only one machine at a
time. The resource term names (a - j, Edge1, Edge2, Range1, Range2)
are default names that can be changed. You assign values in the
following two ways:
•Using Preset Values
• Assigning Bit by Bit
Changing resource properties. When any of the individual term
fields are selected, a configuration pop-up menu appears. Use this pop-
up menu to quickly set the resource term to a preset value.