User`s guide

457
Operator’s Service
Preparing For Use
2 Connect the power cord to the instrument and to the power
source.
This instrument is equipped with a three-wire power cable. When
connected to an appropriate ac power outlet, this cable grounds the
instrument cabinet. The type of power cable plug shipped with the
instrument depends on the country of destination.
3 Turn on the instrument power switch located on the front panel.
To clean the logic analyzer
With the instrument turned off and unplugged, use mild soap and water
to clean the front and cabinet of the logic analyzer.
Harsh soap might damage the water-base paint. Do not immerse the
logic analyzer in water.
To test the logic analyzer
If you require a test to verify the specifications, the Agilent
Technologies 1670G-Series Logic Analyzers Service Guide is required.
If you require a test to initially accept the operation, perform the self-
tests described in Troubleshooting in this chapter.
If the logic analyzer does not operate correctly, go to the flow charts
provided in Troubleshooting in this chapter.