User`s guide

466
Operator’s Service
Troubleshooting
10 Select the Display Test.
A white grid pattern is displayed. These display screens can be used to
adjust the display.
a Select Continue and the screen changes to full bright.
b Select Continue and the screen changes to half bright.
c Select Continue and the test screen shows the Display Test
status changed to TESTED.
11 Select Sys PV, then select Analy PV in the pop-up menu. Select
Chip 2 Tests.
You can run all the analyzer tests at one time by selecting All Analyzer
Tests. To see more details about each test, you can run each test
individually. This example shows how to run Chip 2 Tests. Chip 3, 4,
and 5 Tests operate the same as Chip 2 Tests.