User`s guide

476

Introducing the LAN Interface

The Agilent Technologies Logic Analyzer LAN interface lets you

connect your logic analyzer to an Ethernet network that uses TCP/IP.

With the LAN Interface, you can:

• Set up and run measurements using the logic analyzer's XWindow

interface.

• Copy measurement data from the logic analyzer to your computer using

File Transfer Protocol program (ftp) or Network File System (NFS).

• Save and restore configurations.

• Program the logic analyzer.

Requirements

In order to use your 1670G logic analyzer on the LAN, you need the

following equipment and software:

• Ethernet local area network using TCP/IP protocol.

• If you are using a PC, NFS program or ftp program.

• If you want to use the logic analyzer's XWindow interface, Xserver

program running on your computer.

Characteristics

Physical Connection.

• RJ-45 connector for direct connection to 10Base-T ("ethertwist") networks

• BNC connector for direct connection to 10Base2 ("thinlan") networks