User`s guide

481
Connecting and Configuring the LAN
Connecting and Configuring the LAN
To connect to your network
1 Turn off the logic analyzer.
2 Connect the analyzer to your network using an RJ-45 or BNC
connector.
Ethertwist and thinlan are the two most common types of LAN
network connection. Ethertwist uses unshielded twisted pair and an
RJ-45 connector, and resembles a standard modular phone line.
Thinlan uses coaxial cable. If you are unsure what your network uses
for its physical connection, contact your local network administrator.
The logic analyzer LAN ports are on the back panel. The RJ-45
connector goes in the port labeled "LAN-TP" and the BNC attaches to
the port labeled "LAN-BNC".
3 Turn on the logic analyzer.