User`s guide

483

Connecting and Configuring the LAN

2 Set up the LAN Settings menu.

LAN Settings menu

Lan Port . The LAN Port toggles between LAN TP and LAN BNC. Set

it to whichever type you are using for the connection.

Analyzer IP Address. TCP/IP uses the Internet Protocol (IP)

Address for communication between network nodes and requires this

entry. Each IP address on a network must be unique - contact your

system administrator if you need to have one created for the logic

analyzer. The logic analyzer responds to messages sent to this IP

address.

Gateway IP Address. Gateways act as connections between different

physical subnets. If the logic analyzer is on a different subnet than the

computer you wish to use it with, you need to enter a gateway address.