User`s guide

Using the Trigger Menu

Setting Up Time Correlation between Analyzers

To set up time correlation between a timing

and a state analyzer

To set up time correlation between a timing and a state analyzer, only

the state analyzer needs to have Count Time turned on. The timing

analyzer automatically keeps track of time.

1 In the state Analyzer Trigger menu, select Count.

Count may be Count Off, Count Time, or Count States. Selecting the

field causes a pop-up to appear.

2 Select the field after Count: and select Time.

A warning may appear about reduced memory. It will not prevent you

from changing Count to Count Time.

3 Select Done.

Now when you acquire data you will be able to set up a mixed display.