User`s guide

Contents ▲ 18 ▼ Index
Switching on the Agilent 2100 Bioanalyzer
1 Make sure the bioanalyzer is connected to line power and connected to the PC.
2 Turn on the line switch at the rear of the instrument.
The status LED at the front of the bioanalyzer should light up.
The status LED shows you the current status of the instrument.
Signal Meaning
Green light Instrument is switched on and ready for measurement.
Green blinking Measurement is running.
Orange blinking Instrument is busy (running self diagnostic, for example).
Red light Instrument is not ready for measurement. Switch the instrument off
and on again. If the problem persists, call Agilent service.
Lid
Status LED