User`s manual

11
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
11
Figure 20: USB 2.0 trigger, decode and “lister” display.
Figure 19: Dual serial bus CAN and LIN decode and interleaved
“lister“ display.
Figure 18: Digital channels are captured and displayed time-
correlated with analog channels in MSOs or upgraded DSOs.
Oscilloscope Experience Redefined:
After capturing serial bus communication, you can easily
perform a search operation based on specific criteria
and then quickly navigate to bytes/frames of serial data
that satisfy that search criteria. The 4000 X-Series can
decode two serial buses simultaneously using hardware-
based decoding, and display the captured data in a time
interleaved “lister”display.
Serial protocol decoding can be used simultaneously with
segmented memory and InfiniiScan Zone touch triggering.
The 4000 X-Series has 8 options supporting 10 different
serial protocols including: I
2
C, SPI, USB 2.0, RS232/UART,
CAN-dbc, LIN, FlexRay, MIL-STD 1553, ARINC 429, and I
2
S.
(see page 22)
With an additional 16 integrated digital channels, you
now have up to 20 channels of time-correlated triggering,
acquisition and viewing on the same instrument. This
is especially important in today’s embedded designs
with sophisticated digital control circuitry. Unlike other
oscilloscopes in this class, you can buy a 2- or 4-channel
DSO and enable the 16 digital channels already in the
instrument at any time to make it an MSO. (DSOXPERFMSO)
Experience the Integration
Agilent InfiniiVision Series, including the new 4000 X-Series,
are the only oscilloscopes to use hardware-based serial
protocol decoding. Other vendors’ oscilloscopes use
software post-processing techniques to decode serial
packets⁄ frames, and therefore have slow waveform and
decode capture rates and could miss critical events and
errors due to a long dead-time. Faster decoding with
hardware-based technology enhances the probability of
capturing infrequent serial communication errors.
Serial protocol analysis: Hardware-based serial
protocol decode and triggering
Mixed signal oscilloscope (MSO): Integrated
16 digital channels