User`s manual

13
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
13
Oscilloscope Experience Redefined:
Power measurements and analysis
When you are working with switching power supplies
and power devices, the power measurements application
(DSOX4PWR) provides a full suite of power measurements
and analysis in the oscilloscope.
Included with the DSOX4PWR is a license for the U1881A
PC-based power analysis software package, which provides
additional offline measurements and report generation.
HDTV video triggering and analysis.
Whether you are debugging consumer electronics with
HDTV or characterizing a design, the HDTV measurement
application (DSOX4VID) provides support for a variety of
HDTV standards for triggering and analysis.
Other Key Productivity Tools
Figure 25: Power quality measurement, one of many in the power
measurements application.
Figure 26: Triggering on 1080p HDTV signal analysis.
Figure 27: Perform automatic signal quality testing on USB 2.0
low-speed, full-speed, and hi-speed signals.
USB 2.0 signal quality analysis
With the USB 2.0 signal quality test option (DSOX4USBSQ),
designers of systems with USB interfaces can now perform
automated signal quality testing. This option supports
low-speed, full-speed, and hi-speed applications (hi-speed
tests require 1.5 GHz models). The USB 2.0 signal quality
test with HTML pass/fail report generation includes eye-
diagram mask testing, jitter analysis, EOP bit-width, signal-
ing rate, edge monotonicity, and rise/fall times; all based on
official USB-IF algorithms embedded in the oscilloscope.