User`s manual

25
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
25
Oscilloscope Experience Redefined:
Horizontal system analog channels
4022A 4024A 4032A 4034A 4052A 4054A 4104A 4154A
Time base range 2 ns/div to 50 s/div 1 ns/div to 50 s/div 500 ps/div to 50 s/div
Time base accuracy* ±10 ppm
Time base delay time range
Pre-trigger Greater of 1 screen width or 200 μs (400 μs in interleaving mode)
Post-trigger 1 s to 500 s
Channel-to-channel deskew range ± 100 ns
Δ Time accuracy (using cursors) ± 0.001% of reading ± 0.16% screen width ± 30pS
Modes Main, zoom, roll, XY
XY On channels 1 and 2 only. Z Blanking on Ext Trigger Input, 1.4 V threshold
Bandwidth: Maximum bandwidth. Phase error at 1 MHz: < 0.5 degree
Time base: 200 ns/div to 50 ms/div
Horizontal system digital channels
Minimum detectable pulse width 2 ns
Channel-to-channel skew 2 ns (typical); 3 ns (maximum)
Acquisition system
4022A 4024A 4032A 4034A 4052A 4054A 4104A 4154A
Maximum analog channels sample rate 5 GSa/s half channel interleaved, 2.5 GSa/s all channels
Analog channels equivalent sample rate N/A 128 Gsa/s
Maximum analog channels record length 4 Mpts half channel interleaved, 2 Mpts all channel
Maximum digital channels sample rate 1.25 GSa/s
Maximum digital channels record length 2 Mpts (with digital channels only)
Modes Normal Default mode
Peak detect Capture glitches as narrow as 200 ps at all time base settings
Averaging Selectable from 2, 4, 8, 16, 64, ... to 65,536
High
resolution
Real-time boxcar averaging reduces random noise and effectively increases vertical
resolution
12 bits: ≥ 50 μs/div 11 bits: ≥ 20 μs/div 10 bits: ≥ 10 us/div 9 bits: ≥ 5 us/div
Segmented Segmented memory optimizes available memory for data streams that have
long dead times between activity. Maximum segments = 1000. Re-arm time =
1 μs (minimum time between trigger events). Re-arm time when used with the
InfiniiScan Zone = 65 us or faster (typical)
Roll Displays the waveform moving across the screen from right to left. Available at the
time base 50 ms/div or slower
Equivalent
time
1 GHz and 1.5 GHz models only. 7.8 ps fine interpolator resolution yields a
maximum effective sample rate of 128 GSa/s
InfiniiVision 4000 X-Series Performance Characteristics
* Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.