User`s manual

31
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
31
Oscilloscope Experience Redefined:
Dual channel WaveGen - built-in function/arbitary waveform generator
DC offset Range ±5 V into Hi-Z, except ±4 V if sine wave, ±2.5 V if sinc,
cardiac, or Gaussian pulse into Hi-Z
±2.5 V into Hi-Z, except ±2 V if sine wave, ±1.25 V if
sinc, cardiac, or Gaussian pulse into 50 Ω
Resolution: Larger of 250 uV or 3 digits
Accuracy (waveform modes): ±1.5% of offset setting ±1% of amplitude ±1 mV
Accuracy (DC mode): ±1.5% of offset setting ±3 mV
Main output Impedance : 50 Ω typical
Isolation: Not available, main output BNC is grounded
Protection: Overload automatically disables output
Trigger output Trigger output available on trig-out BNC
Digital voltmeter (specifications are typical)
Source Analog channels only (1-4)
Functions ACrms, DC, DCrms, frequency
Resolution ACV/DCV: 3 digits
Counter frequency: 5.5 digits
Measuring rate 100 times/second
Autoranging Automatic adjustment of vertical amplification to maximize the dynamic range of measurements
Range meter Graphical display of most recent measurement, plus extrema over the previous 3 seconds
General and environmental characteristics
Power line consumption Maximum 120 watts
Power voltage range 100-120V, 50/60/400 Hz; 100-240V, 50/60 Hz ± 10% auto ranging
Humidity Operating: 50% to 95% RH at 40 °C for 5 days
Nonoperating: 90% RH at 65 °C for 24 hr
Altitude Operating: up to 3,000 m (15,000 ft)
Nonoperating: up to 15,300 m (50,000 ft)
Electromagnetic compatibility Meets EMC Directive (2004/108/EC), meets or exceeds IEC 61326-1:2005/EN
61326-1:2006 Group 1 Class A requirement
CISPR 11/EN 55011
IEC 61000-4-2/EN 61000-4-2
IEC 61000-4-3/EN 61000-4-3
IEC 61000-4-4/EN 61000-4-4
IEC 61000-4-5/EN 61000-4-5
IEC 61000-4-6/EN 61000-4-6
IEC 61000-4-11/EN 61000-4-11
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS
Safety UL61010-1 2nd edition, CAN/CSA22.2 No. 61010-1-04
InfiniiVision 4000 X-Series Performance Characteristics