User`s manual

9
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
9
One of the biggest challenges of using an oscilloscope is
setting up an advanced trigger to isolate a signal of interest.
While advanced triggers are powerful features, InfiniiScan
Zone touch trigger provides a turnkey trigger solution.
You simply observe the signal of interest on the display, and
draw a zone (box) around it. What used to be hours of work
can now take just a few seconds. If you want to move your
zones to another location, just drag them over. The 4000
X-Series can be set up to easily trigger on one or two zone
boxes simultaneously with either must intersect or must not
intersect conditions.
InfiniiScan Zone triggering does not compromise the
waveform update rate; the 4000 X-Series will still maintain
an ultra-fast 200,000 waveforms per second or more, even
with additional features turned on. In other words, the
oscilloscope that sees everything can easily trigger on
anything.
InfiniiScan Zone touch trigger + segment memory: a
whole new experience
The combination of the industry’s only hardware-based
InfiniiScan Zone touch trigger with the 4000 X-Series’
segment memory simplifies and enhances your debugging
experience. In Figure 16, the 4000 X-Series has isolated and
captured 1,000 metastable signals, showing the critical bit
errors over a 32-second time span at 5 GS/s sampling rate in
the segment memory. The segment memory also allows you
to overlay all segments to identify the worst-case signal.
Oscilloscope Experience Redefined:
Figure 15. When you see anomalies, all you have
to do is draw a zone box to trigger on them.
Experience the Usability
InfiniiScan Zone touch trigger
Figure 16. Combination of the InfiniiScan Zone
touch trigger and segmented memory.