User`s manual

The following program segment shows the context in which
TRIGger:DELay is used.
Example: Setting a
Trigger Delay
10 !Configure the scanning multimeter for DC voltage measurements on
20 !channels 100 through 104. Make 5 scans through the channel list.
30 !Make a scan every 10 seconds.
40 CONF:VOLT:DC (@100:104)
50 TRIG:COUN 5
60 TRIG:DEL 10
70 READ?
Querying the Trigger
Delay
The trigger delay setting is queried with the TRIGger:DELay? and
TRIGger:DELay? MIN | MAX commands. See Chapter 5 for additional
information.
Chapter 4 Understanding the HP E1326B/E1411B Multimeter 107