User`s manual

Command Description
SAMPle :COUNt 1-16777215 | MIN | MAX
:COUNt? [MIN | MAX]
:SOURce IMM | TIM
:SOURce?
:TIMer 76 µs-65.534 ms | MIN | MAX
:TIMer? [MIN | MAX]
Set number of readings per trigger.
Query number of readings per trigger.
Set pacing source.
Query pacing source.
Define period between readings.
Query period between readings.
[SENSe:] FUNCtion[:<function>]
FUNCtion?
RESistance:APERture <time> | MIN | MAX
RESistance:APERture? [MIN | MAX]
RESistance:NPLC <number> | MIN | MAX
RESistance:NPLC? [MIN | MAX]
RESistance:OCOMpensated OFF | 0 | ON | 1
RESistance:OCOMpensated?
RESistance:RANGe <range> | MIN | MAX
RESistance:RANGe? [MIN | MAX]
RESistance:RANGe:AUTO OFF | 0 | ON | 1
RESistance:RANGe:AUTO?
RESistance:RESolution <resolution> | MIN | MAX
RESistance:RESolution? [MIN | MAX]
VOLTage:AC:RANGe <range> | MIN | MAX
VOLTage:AC:RANGe? [MIN | MAX]
VOLTage:APERture <time> | MIN | MAX
VOLTage:APERture? [MIN | MAX]
VOLTage[:DC]:RANGe <range> | MIN | MAX
VOLTage[:DC]:RANGe? [MIN | MAX]
VOLTage:NPLC <number> | MIN | MAX
VOLTage:NPLC? [MIN | MAX]
VOLTage:RANGe:AUTO OFF | 0 | ON | 1
VOLTage:RANGe:AUTO?
VOLTage:RESolution <resolution>
VOLTage:RESolution? [MIN | MAX]
Select measurement function.
Query measurement function.
Set aperture (integration) time in seconds.
Query aperture (integration) time.
Set integration time in PLCs.
Query integration time.
Enable/disable offset compensation.
Query offset compensation mode.
Select range.
Query range.
Enable/disable autorange function.
Query autorange mode.
Specify resolution.
Query resolution.
Select measurement range.
Query range.
Set aperture (integration) time in seconds.
Query aperture (integration) time.
Select range.
Query range.
Set integration time in PLCs.
Query integration time.
Enable/disable autoranging.
Query autorange mode.
Specify resolution.
Query resolution.
SYSTem :CDEScription? <card_number>
:CTYPe? <card_number>
:ERRor?
Return description of multiplexer in scanning
multimeter.
Return card type of multiplexer in scanning
multimeter.
Return error number/message from error queue.
TRIGger :COUNt 1-16777215 | MIN | MAX
:COUNt? [MIN | MAX]
:DELay 0-16.777215 | MIN | MAX
:DELay? [MIN | MAX]
:DELay:AUTO OFF | 0 | ON | 1
:DELay:AUTO?
[:IMMediate]
:SOURce BUS | EXT | HOLD | IMM | TTLTrg0-TTLTrg7
:SOURce?
Set number of triggers or scans.
Query trigger count.
Set delay between trigger and start of
measurement.
Query trigger delay.
Enable/disable automatic trigger delay.
Query automatic trigger delay mode.
Trigger immediately.
Specify trigger source.
Query trigger source.
Chapter 5 Command Reference 188