User`s manual

Timer/Pacer Module Size/Device Type:
Timer Range: 76 µsec to 65.5 msec B, register-based (E1326B)
Resolution: 2 µs C, register-based (E1411B)
Accuracy: 0.01%
Connectors Used: P1
Programmable Delay No. Slots: 1 (standard terminal panel takes 2 slots)
Delay Range: 40 µsec to 16 sec
Resolution: 2 µsec
Accuracy: 0.01% VXIbus Interface Capability:
Slave, interrupter, A16, D16
External Trigger Interrupt Level: 1-7, selectable
Trigger Condition: negative edge
Minimum Pulse Width: 100 nsec Power Requirements:
Maximum Trigger Rate: 5 kHz Voltage
+5 +12
(fixed range, 10 µsec aperture) Peak module
current, IPM (A): 0.20 0.55
Dyanmic module
current, IDM (A): 0.01 0.01
Typical Reading Storage Watts/Slot: 8.5 (E1411B) 4.2 (E1326B)
HP 75000 Number of
Mainframe Readings Cooling/Slot:
0.14 mm H
2
O @ 0.71 liter/sec (E1411B)
Series B with 0.07 mm H
2
O@ 0.35 liter/sec (E1326B)
standard memory 50,000
Humidity: 65% 0° to 40°C
Series B with Operating Temperature: 0° to 55°C
512 kB memory
(HP E1300/01A Opt. 010) 100,000 Storage Temperature: -40° to 75°C
Series B with
1 MB memory
(HP E1300/01A Opt. 011)200,000
Series C with
Command Module
(HP E1406A) 100,000
Series C plus E1406A
with Opt. 010 200,000
196 HP E1326B/E1411B Multimeter Specifications Appendix A