User`s manual

HP E1326B Internal
Installation
When the HP E1326B is installed in an HP E1300A/E1301A/E1302A
mainframe, it occupies one slot. However, the faceplate to which the input
terminals are connected covers up an additional slot. This prevents another
module from being installed in the slot directly above the multimeter.
To make the two slots available to other modules, the HP E1326B can be
installed internal to the mainframe (in slot 2) using an internal installation
kit (HP P/N E1326-80004).
Multimeter installation into the external slots is covered in the Installation
and Getting Started Guide. Instructions for installing the multimeter
internally are included in the installation kit.
Connecting the
HP E1326B Adapter
If the HP E1326B multimeter is installed internal to the HP E1300A/E1301A
mainframe, the HP E1326-80005 adapter can be used to provide HI, LO,
COM, and HI banana plug terminals for the multimeter. When the adapter
is connected as shown in Figure 2-4, the terminals, rather than the
multiplexer, are the input to the multimeter.
Figure 2-4. Connecting the HP E1326B Adapter
Chapter 2 Configuring the HP E1326B/E1411B Multimeter 25