User`s manual

Installing the
HP E1411B in a
Mainframe
The HP E1411B multimeter can be installed in any slot (except slot 0) in a
C-size VXIbus mainframe. Refer to Figure 2-5 to install the E1411B in a
mainframe.
Set the extraction levers out.
Slide the multimeter into any slot
(except slot 0) until the backplane
connectors touch.
Seat the multimeter into
the mainframe by pushing
in the extraction levers.
Tighten the top and bottom screws
to secure the multimeter to the
mainframe.
To remove the multimeter from the mainframe,
reverse the procedure.
Figure 2-5. Installing the HP E1411B Multimeter in a VXIbus Mainframe
26 Configuring the HP E1326B/E1411B Multimeter Chapter 2