User`s manual

Carrier Cable Assemblies
The following table and figures show the cables used to connect relay and
FET multiplexers to the HP E1411B multimeter. These cables are required
when the (B-Size) multiplexers are installed in the Series C mainframe
using the HP E1403B A/B-to-C-size module adapter.
Table 2-1. Cable Assemblies
Configuration 1: HP E1345A/46A/47A/55A or 56A (relay multiplexer) in HP E1403B module adapter.
Configuration 2: HP E1351A/52A/53A/57A or 58A (FET multiplexer) in HP E1403B module adapter.
Cable assemblies for HP E1411B multimeter-to-multiplexer connections
Configuration 1 Configuration 2
Connecting the HP E1411B to: E1326-61611 (analog bus) E1326-61611 (analog bus)
E1411-61601 (digital bus)
Cable assemblies for multiplexer-to-multiplexer connections
Configuration 1 Configuration 2
Connecting Configuration 1 to: E1400-61605 (analog bus) E1400-61605 (analog bus)
Connecting Configuration 2 to: E1400-61605 (analog bus) E1400-61605 (analog bus)
and
E1400-61601 (digital bus)
Examples:
1. To connect the HP E1411B multimeter to a FET multiplexer in the HP E1403B module adapter
(configuration 2), the analog and digital bus cables in kit E1400-80001 are required.
2. To connect a FET multiplexer in the HP E1403B module adapter (configuration 2) to a relay
multiplexer in the E1403B adapter (configuration 1), the E1400-61605 analog bus cable is required.
Notes:
1. The HP E1326-61611 analog bus cable and HP E1411-61601 digital bus cable are available
under kit part number E1411-80001. This kit is not included with the multimeter or multiplexers.
It must be ordered separately.
2. The HP E1400-61605 analog bus cable ships with the HP E1345A/46A/47A/55A and 56A relay
multiplexers. The HP E1400-61605 analog bus cable and HP E1400-61601 digital bus cable
ship with the HP E1351A/52A/53A/57A/58A FET multiplexers.
Chapter 2 Configuring the HP E1326B/E1411B Multimeter 37