User`s manual

370 !Retrieve the readings from multimeter memory, enter and display them
380 !on the computer.
390 OUTPUT 70903;"FETC?"
400 ENTER 70903;Rdgs(*)
410 PRINT Rdgs(*)
420 END
Comments
• The multimeter and (multiplexer) switchbox have unique secondary
HP-IB addresses and as such, are two separate instruments. Input
signals from the switchbox are routed to the multimeter via the
analog bus. The scanning sequence is controlled with selected
TTLTrg trigger bus lines.
• The HP E1460A multiplexer has eight banks of channels with eight
channels in each bank. Channel numbers are 00 through 07 on
bank 0, up to 70 through 77 on bank 7. Since the switchbox consists
of only one multiplexer, the channel list for scanning 64 channels
is
(@100:177).
• Additional information on triggering the multimeter is found in
Chapters 4 and 5. Information on the multimeter’s
OUTPut
subsystem is contained in Chapter 5.
Chapter 3 Using the HP E1326B/E1411B Multimeter 53