Service manual

Shipping Guidelines Follow the steps in Figure 1-3 to return a relay multiplexer to an Agilent
Technologies Sales and Service Office.
1. Prepare the Multiplexer
* Remove user wiring from terminal block
* Attach tag to module/pod that identifies
- Owner
- Model Number/Serial Number
- Service required
* Place tagged device in approved anti-static bag
2. Package the Multiplexer
* Place packaged multiplexer in shipping carton*
* Place 75 to 100 mm (3 to 4 inches) of shock-
absorbing material around the multiplexer.
* Seal the shipping carton securely.
* Mark the shipping carton FRAGILE.
3. Ship the Multiplexer to Agilent Technologies
* Place address label on shipping carton
* Send carton to Agilent Technologies
* We recommend that you use the same shipping materials as those used in factory packaging (available
from Agilent Technologies). For other (commercially-available) shipping materials, use a double-wall carton
with minimum 2.4 MPa (350 psi) test.
Figure 1-3. Packaging/Shipping Guidelines
Chapter 1 General Information 19