Service manual

580 END IF
590 OUTPUT @Mux;"OPEN (@"&Cc$&"00)"
600 OUTPUT @Mux;"CLOS (@"&Cc$&"15)"
610 OUTPUT @Dmm;"TRIG SGL"
620 ENTER @Dmm;Result (I,3)
630 IF Result (I,3) > .01 THEN
640 PRINT "Tree B path leakage out of tolerance ";Result$(I,3);" Volts"
650 END IF
660 OUTPUT @Mux;"*RST"
670 IF I < 5 THEN
680 PRINT "Test ";I+1;" complete"
690 PRINT "Turn power supply OFF"
700 PRINT "Press Continue for test ";I+2
710 PAUSE
720 END IF
730 NEXT I
740 PRINT "Leakage tests complete"
750 DISP "Press Continue to print measurement results"
760 PAUSE
770 CLEAR SCREEN
780 !
790 ! Print results
800 !
810 Format:IMAGE K,3X,D.DDDD," Vdc",3X,D.DDDD," Vdc",3X,D.DDDD,
" Vdc",3X,D.DDDD," Vdc"
820 PRINT
830 PRINT " Positive polarity leakage "
840 PRINT " Direct Channels Tree A
Tree B"
850 PRINT USING Format;"HI to LO
",Result(0,0),Result(0,1),Result(0,2),Result(0,3)
860 PRINT USING Format;"HI to Chassis
",Result(1,0),Result(1,1),Result(1,2),Result(1,3)
870 PRINT USING Format;"LO to Chasis
",Result(2,0),Result(2,1),Result(2,2),Result(2,3)
880 PRINT
890 PRINT " Negative polarity leakage "
900 PRINT " Direct Channels Tree A
Tree B"
910 PRINT USING Format;"HI to LO
",Result(3,0),Result(3,1),Result(3,2),Result(3,3)
920 PRINT USING Format;"HI to Chassis
",Result(4,0),Result(4,1),Result(4,2),Result(4,3)
930 PRINT USING Format;"LO to Chasis
",Result(5,0),Result(5,1),Result(5,2),Result(5,3)
940 END
Verification Tests 2-21