User manual

printf ("\n\nTesting Channel %u %s", channel, data[i][0]);
printf ("\n Connect DVM HI to %s", data[i][1]);
printf ("\n Connect DVM LO to %s", data[i][2]);
printf ("\n Press ENTER when ready");
getchar ();
iprintf (id, "OPEN (@10%u)\n", channel);
iprintf (dm, "TRIG SGL\n");
iscanf (dm, "%lf", &result[i]);
iscanf (dm, "%t", cr);
iprintf (id, "CLOS (@10%u)\n", channel);
printf ("\nChannel %u %s measures %.4e Ohms", channel, data[i][0], result[i]);
i++;
printf ("\n\nTesting Channel %u %s", channel, data[i][0]);
printf ("\n Connect DVM HI to %s", data[i][1]);
printf ("\n Connect DVM LO to %s", data[i][2]);
printf ("\n Press ENTER when ready");
getchar ();
iprintf (id, "CLOS (@10%u)\n", channel);
iprintf (dm, "TRIG SGL\n");
iscanf (dm, "%lf", &result[i]);
iscanf (dm, "%t", cr);
iprintf (id, "OPEN (@10%u)\n", channel);
printf ("\nChannel %u %s measures %.4e Ohms", channel, data[i][0], result[i]);
i++;
}
for (channel = 992;channel <= 995; channel++)
{
printf ("\n\nTesting Channel %u %s", channel, data[i][0]);
printf ("\n Connect DVM HI to %s", data[i][1]);
printf ("\n Connect DVM LO to %s", data[i][2]);
printf ("\n Press ENTER when ready");
getchar ();
iprintf (id, "CLOS (@10%u)\n", channel);
iprintf (dm, "TRIG SGL\n");
iscanf (dm, "%lf", &result[i]);
iscanf (dm, "%t", cr);
iprintf (id, "OPEN (@10%u)\n", channel);
printf ("\nChannel %u %s measures %.4e Ohms", channel, data[i][0], result[i]);
i++;
printf ("\n\nTesting Channel %u %s", channel, data[i][0]);
printf ("\n Connect DVM HI to %s", data[i][1]);
printf ("\n Connect DVM LO to %s", data[i][2]);
printf ("\n Press ENTER when ready");
getchar ();
iprintf (id, "CLOS (@10%u)\n", channel);
iprintf (dm, "TRIG SGL\n");
iscanf (dm, "%lf", &result[i]);
iscanf (dm, "%t", cr);
iprintf (id, "OPEN (@10%u)\n", channel);
printf ("\nChannel %u %s measures %.4e Ohms", channel, data[i][0], result[i]);
i++;
}
channel = 996;
printf ("\n\nTesting Channel %u %s", channel, data[i][0]);
printf ("\n Connect DVM HI to %s", data[i][1]);
printf ("\n Connect DVM LO to %s", data[i][2]);
Agilent E1460A Service Manual Example C Programs 61