Installation guide

Chapter 2 13
Installation
Checking the Shipment
2. Installation
Checking the Shipment
After you receive the analyzer, carry out checks during unpacking according to the
following procedure.
WARNING When unpacking the analyzer, if the external face of the analyzer (such as the cover,
front/rear panel, LCD screen, power switch, and port connectors) appear to be
damaged during transport, do not turn on the power switch. Otherwise, you may get
an electric shock.
Step 1. Check that the packing box or shock-absorbing material used to package the analyzer has
not been damaged.
NOTE If the packing box or shock-absorbing material has been damaged, leave the packing box
and shock-absorbing material as is until other inspection items are checked as follows:
Step 2. Check the packaged items supplied with the analyzer for any damage or defects.
Step 3. By referring to the furnished contents list, check that all packaged items supplied with the
analyzer have been provided as per the specified options.
Step 4. After checking, if one of the following applies, contact your nearest Agilent Technologies
sales and service office.
1. The packing box or shock-absorbing material used to package the analyzer has been
damaged or the shock-absorbing material has traces where extreme force has been
applied.
2. A packaged item supplied with the analyzer has mechanical damage or defects.
3. A packaged item supplied with the analyzer is missing.
4. A fault has been detected in the subsequent operation check of the analyzer.
If an abnormality is detected in step 1, contact the company that transported the analyzer as
well as your nearest Agilent Technologies sales and service office. For inspection by the
transport company, save the packing box, shock-absorbing material, and packaged items as
you received them.