Installation guide

Agilent Technologies E5500B Installation Guide
1-7
Welcome to the E5500B Phase Noise Measurement System Series of
Solutions
Step 2a - Removing
your Computer’s
Cover
CAUTION Refer to your computer’s documentation for installation safety instructions
and specific instructions for opening your computer.
Use the following steps to install the GPIB and PC-Digitizer cards in your
computer:
3. Power down the computer and all its peripherals.
4. Disconnect the power cord from the computer.
5. Unlock and remove the cover from the computer. This gives access to
the I/O slots. (See your computer documentation for detailed
instructions.)