Installation guide

Agilent Technologies E5500B Installation Guide 1-17
Welcome to the E5500B Phase Noise Measurement System Series of
Solutions
4. Double-click on Agilent_IO_libs,thenonSetup.exe and follow the
instructions (accept the default settings).
NOTE When offered the choice, do not restart your computer at this time.
Step 3b - Installing the
Agilent/HP I/O
Library Upgrade
1. Make sure your computer and monitor are turned on.
2. Place the E5500 Phase Noise Measurement Software CD-ROM in the
CD-ROM drive.
3. The following dialog box will appear.