Installation guide

Agilent Technologies E5500B Installation Guide 1-27
Welcome to the E5500B Phase Noise Measurement System Series of
Solutions
15. The following dialog box will appear.
The left pane shows either the demo mode, or in this case, a list of assets
or asset roles. An asset is any piece of hardware (Agilent/HP 70420A)
that you want configured for system use. An asset role is the general
category for hardware (test sets, downconverters, counters, for
example). The right pane is information only. The information can be
changed by double-clicking a specific asset.
You have just used the Asset Manager to configure the Agilent/HP
70420A test set. The process for configuring any asset is essentially the
same. As a second example, we will now configure the PC-Digitizer.
Both the test set and PC-digitizer are required to perform the confidence
test at the end of this chapter.
Configuring the PC Digitizer
For this example we will use invoke the Asset Manager Wizard from within
the Asset Manager. This is the most common way to add assets.