Installation guide

Agilent Technologies E5500B Installation Guide 1-29
Welcome to the E5500B Phase Noise Measurement System Series of
Solutions
18. Click on II PCI20428W-1, then click the Next button.
19. From the Interface pull-down list, select PCI.
20. In the Address box, type 320. 320 is the default address for the II20428
PC-Digitizer.
The Library pull-down list does not apply to this example. It applies
specifically to either the Agilent GPIB or the National GPIB interface
cards.
21. Click the Next button.
22. In the Asset Name box, type II PCI20428W-1.