Installation guide

Agilent Technologies E5500B Installation Guide 1-39
Welcome to the E5500B Phase Noise Measurement System Series of
Solutions
Step 11. Running the Software Confidence Test
This measurement demonstration will introduce you to the system’s
operation by guiding you through an actual phase noise measurement.
This first measurement tests the Agilent/HP 70420A Test Set’s low-noise
amplifier circuitry. The phase detectors are not tested. This measurement
will also confirm that the PC and test set are communicating with each other.
1. From the File menu, choose Open.
2. If necessary, choose the drive or directory where the file you want is
stored.
3. In the File Name box, choose Confidence.pnm.
4. Click the Open button.