User`s guide

158 Agilent E6474A User’s Guide
B GPS Connections for E74xx Systems
Phone, Receiver with GPS, and Optional Differential GPS
1 Connect the software license key to the PARALLEL port of the
computer.
2 Connect the RS-232 data cable to the RS-232 port of the
receiver. Connect the opposite end to the
SERIAL port of the
computer.
3 Connect the RF antenna to the RF INPUT connector of the
receiver. Use the supplied Type-N to TNC adapter, if
necessary.
4 Connect the GPS antenna to the GPS ANTENNA connector of
the receiver. Agilent Technologies recommends that a
Figure 61 Phone, E645xx receiver with GPS, and DGPS