User`s guide

Permanent In-Vehicle Hardware Installation E
Agilent E6474A User’s Guide 209
Recommended Tools
CAUTION
Secure all components to prevent movement while the vehicle is in
motion.
When routing cables leave sufficient length on both ends for making
connections. Avoid sharp metal edges, sharp bends, and crushing the
cables. Use a rubber grommet if the cable is routed through a hole in a
metal panel. Do not route a cable near the catalytic converter. Use
wiring troughs when they are available.
• Electric drill and bits • Terminal crimping tool or
equivalent
• Screwdriver • Pliers
• Phillips screwdriver • Utility knife
• Wire cutter and stripper • Panel removing tool (optional)
• Voltmeter • For in-vehicle rack installation,
either a nut driver, electric
screwdriver, or drill with
screwdriver bits