Technical data

181
GSM/EDGE Programming Commands
13 GSM/EDGE Programming Commands
This chapter lists all the commands used to set up the GSM/EDGE measurements from within the List
Sequencer.
NOTE See also: mode parameters related to GSM/EDGE, as described in “Mode and
Measurement Parameters” on page 54.
The chapter topics are:
• GMSK Phase and Frequency (PFER)
• GSM Loopback BER
• EDGE Power vs. Time (PvT)
• EDGE Error Vector Magnitude (EVM)
• EDGE Output RF Spectrum (ORFS)
• EDGE Loopback BER