Technical data
 210 Chapter 14 
W-CDMA Programming Commands
Modulation Accuracy
W-CDMA Programming Commands
Modulation Accuracy
This section provides the remote control SCPI commands for the W-CDMA Modulation Accuracy 
measurement from within the List Sequencer. This measurement is available only if you have the 
W-CDMA measurement application licensed on the test set.
For more detailed information about the Modulation Accuracy measurement, refer to the online help 
associated with the W-CDMA measurement application, which is also available in PDF format (“User’s 
and Programmer’s Reference”) on the Agilent website, www.agilent.com/find/e6640a. 
You can also refer to the measurement guide for the X-series W-CDMA measurement application, which 
is available on the Agilent website, www.agilent.com/find/mxa.
Modulation Accuracy measurement SCPI commands
There is a set of SCPI commands available to program the W-CDMA modulation accuracy measurement 
when it is used in the W-CDMA mode. To set up the W-CDMA measurements from within the Sequence 
Analyzer mode you need to prefix the SCPI commands with LSEQuencer:WCDMa. For example, the 
[:SENSe]:RHO part of the modulation accuracy SCPI commands are replaced with 
[:SENSe]:LSEQuencer:WCDMa:RHO
The following commands are used to set up the modulation accuracy measurement.
[:SENSe]:LSEQuencer:WCDMa:RHO:CAPTure:TIME[:FRAMe]
[:SENSe]:LSEQuencer:WCDMa:RHO:SWEep:OFFset
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:RMS
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:PEAK
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:RHO
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:CDERror
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:FERRor
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:CPICh[:BTS]:POWer
:CALCulate:LSEQuencer:WCDMa:RHO:LIMit:CPICh[:BTS]
[:SENSe]:LSEQuencer:WCDMa:RHO:SYNC[:BTS]
[:SENSe]:LSEQuencer:WCDMa:RHO:SYNC:SYMBol:SRATe
[:SENSe]:LSEQuencer:WCDMa:RHO:SYNC:SYMBol:SPRead
[:SENSe]:LSEQuencer:WCDMa:RHO:SYNC:MS
[:SENSe]:LSEQuencer:WCDMa:RHO:SYNC:SCRamble[:BTS]
[:SENSe]:LSEQuencer:WCDMa:RHO:SFORMat:MS
[:SENSe]:LSEQuencer:WCDMa:RHO:PRACh:SIGNature
[:SENSe]:LSEQuencer:WCDMa:RHO:SYNC:SCRamble[:BTS]:OFFSet










